There will eventually come a time when your wastewater treatment plant pumps are due for replacement. Perhaps the pump is old and you or your company is looking to upgrade to the latest technology. Perhaps even something as simple as the previous pump broke down and you need to find a new one. Often, it is a combination of the two, as most operators would tend to neglect to find the latest types of pumps until the old one can no longer work and really needs to be replaced. Whatever the reason may be, this article will provide you with some information to help you understand a little more about Komline Sanderson Plunger Pumps in the event that you may need to replace it.
Understanding Komline Sanderson Plunger Pumps
The first step to getting your Komline Sanderson Plunger Pumps replaced is to first understand a few things about it. One of the first few things to note is that these pumps are heavy-duty constructions, made up of 30,000-40,000 close-grained iron, which enables operation at high pressures up to 130 psi and hydrostatic test pressures up to 200 psi. Despite the heavy parts, the pump is designed in such a way that it is made in sections and can be removed so as to easily repair and replace parts. This is good news for you, as it could be possible to fix your pump problems without needing a complete rebuild or overhaul.
Also, the pumps, like all plunger pumps, are positive displacement pumps. This means that there will be pulsation in the lines running through the wastewater treatment system. That means a lot of vibration and a lot of noise pollution as well. You may then wish to look at some of the newer models of pumps which are air operated diaphragm pumps. The air chambers within these pumps help with this pulsation by acting as dampeners on both the suction and the discharge, giving you a very positive upgrade in your overall system.
Securing Komline Sanderson Plunger Pumps
As these pumps are extremely powerful and do heavy-duty work, it is best to secure them before putting them in operation. Many wastewater treatment companies would opt for pouring concrete pads for the pumps to sit atop. However, if this is not an option due to city or state laws, there is an alternative available. The pump may also be bolted to the floor via a steel base. The task of replacing the pump will, therefore, require different skills and approaches depending on how the previous pump was installed.
Getting The Best Expertise To Do The Job
The task of replacing a Kodaline Sanderson Plunger Pump is no small matter. Should you require a pump replacement service, get in touch with a company with over seventy-five years of expertise in wastewater treatment matters. They will ensure that you make the best choices for your company and your existing system.